Today’s Forum Thread of the Day comes from bjh1 who has been having success with the 2014 SLDR mini driver (14 degrees). However, bjh1 “wants to hit a ‘real’ driver”, and after explaining how his results haven’t been as good with ‘big’ drivers, our members give their advice on steps bjh1 could take.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- DaveGoodrich: “If you actually hit the “mini” better (i.e. more consistent center face contact), then the general recommendation has been to try a normal driver with a shorter shaft and/or more loft.”
- MillHill88: “Keep Swing Weight in mind. Every inch you cut off a club, you will reduce the swing weight by a few points. Example: your D2 swing weight could become C9. If you cut the shaft down, put a heavier grip on to help eliminate too much SW loss.”
- Valtiel: “For many people, it is a length thing, modern drivers are just too dang long most of the time. For others, it’s a head size thing. Remember, it’s just a piece of metal on a stick; everything else is in your head. Figure out what makes your head work and you’re golden. Try shortening your driver first and don’t be afraid to take a lot off. Maybe try with a cheap shaft first just to experiment.”
- MBBG: “Just go with what works. It’s that simple. The Original One has been a life saver for me as I’ve struggled through some major driver issues this spring. Been playing driver roulette all season and think I now have something that is going to work, but I’m keeping it in the bag.”